AudioCodes Mediant 500 E-SBC User Manual page 187

User's Manual
3. Click Add; the following dialog box appears:
Figure 15-3: DHCP Option Table - Add Record Dialog Box
4. Configure additional DHCP Options for the DHCP server according to the parameters
described in the table below.
5. Click Submit.
Table 15-4: DHCP Option Table Parameter Descriptions
Parameter
Web: Index
CLI: dhcp option
[DhcpOption_Index]
Web: DHCP Server Index
CLI: dhcp-server-number
[DhcpOption_DhcpServerIndex]
Web: Option
CLI: option
[DhcpOption_Option]
Web: Type
CLI: type
[DhcpOption_Type]
Version 6.8
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Associates the DHCP Option table entry with a DHCP server that
you configured in ''Configuring the DHCP Server'' on page 181.
Note: Currently, only one DHCP server (Index 0) can be
configured and therefore, this parameter is always set at 0.
Defines the code of the DHCP Option.
The valid value is 1 to 254. The default is 159.
For example, for DHCP Option 150 (Cisco proprietary for defining
multiple TFTP server IP addresses), enter the value 150.
Defines the format (type) of the DHCP Option value that is
configured in the 'Value' parameter (see below).

[0] ASCII = (Default) Plain-text string (e.g., when the value is
a domain name).

[1] IP address = IPv4 address.

[2] Hexadecimal = Hexadecimal-encoded string.
For example, if you set the 'Value' parameter to "company.com",
you need to set the 'Type' parameter to ASCII.
187
Description
Mediant 500 E-SBC
15. Services