AudioCodes Mediant 500 E-SBC User Manual page 685

User's Manual
Parameter
Software/Configuration File URL Path for Automatic Update Parameters
CLI: firmware
[CmpFileURL]
CLI: voice-configuration
[IniFileURL]
CLI: prerecorded-tones
[PrtFileURL]
CLI:call-progress-tones
[CptFileURL]
CLI: cas-table
[CasFileURL]
CLI: tls-root-cert
[TLSRootFileUrl]
CLI: tls-cert
[TLSCertFileUrl]
Version 6.8
Defines the name of the cmp file and the path to the server (IP
address or FQDN) from where the device can load the cmp file and
update itself. The cmp file can be loaded using HTTP/HTTPS.
For example: http://192.168.0.1/filename
Notes:

For this parameter to take effect, a device reset is required.

When this parameter is configured, the device always loads the
cmp file after it is reset.

The cmp file is validated before it's burned to flash. The
checksum of the cmp file is also compared to the previously
burnt checksum to avoid unnecessary resets.

The maximum length of the URL address is 255 characters.
Defines the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Notes:

For this parameter to take effect, a device reset is required.

When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.

The case-sensitive string, "<MAC>" can be used in the file name
for instructing the device to replace it with the device's MAC
address. For more information, see MAC Address Automatically
Inserted in Configuration File Name on page 578.

The maximum length of the URL address is 99 characters.
Defines the name of the Prerecorded Tones (PRT) file and the path
to the server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the CAS file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the TLS trusted root certificate file and the URL
from where it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
Defines the name of the TLS certificate file and the URL from where
it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
685
53. Configuration Parameters Reference
Description
Mediant 500 E-SBC