AudioCodes Mediant 500 E-SBC User Manual page 609

User's Manual

To view call routing status:

Open the Call Routing Status page (Status & Diagnostics tab > VoIP Status menu >
Call Routing Status).
Parameter
Call-Routing Method
IP Address
State
Version 6.8
Figure 46-8: Call Routing Status Page
Table 46-4: Call Routing Status Parameters

Proxy/GK = Proxy server (Proxy Set) is used to route calls. For
configuring Proxy Sets, see ''Configuring Proxy Sets'' on page 270.

Routing Table = Calls are routed using the routing table:

Gateway calls: Outbound IP Routing table (Configuring
Outbound IP Routing Table on page 379)

SBC calls: SBC IP-to-IP Routing table (Configuring SBC IP-to-IP
Routing Rules on page 477)

Not Used = Proxy server isn't defined.

IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.

N/A = Proxy server isn't defined.

OK = Communication with the Proxy server is in order.

Fail = No response from any of the defined Proxies.
609
Description
46. VoIP Status
Mediant 500 E-SBC