AudioCodes Mediant 500 E-SBC User Manual page 706

Parameter
(HTTPS)
EMS: HTTPS Only
CLI: secured-connection
[HTTPSOnly]
EMS: HTTPS Port
CLI: https-port
[HTTPSPort]
Web/EMS: HTTPS Cipher String
CLI: https-cipher-string
[HTTPSCipherString]
Web: HTTP Authentication Mode
EMS: Web Authentication Mode
CLI: http-auth-mode
[WebAuthMode]
Web: Requires Client Certificates
for HTTPS connection
CLI: req-client-cert
[HTTPSRequireClientCertificate]
User's Manual

[0] HTTP and HTTPS (default).

[1] HTTPs Only = Unencrypted HTTP packets are blocked.
Note: For this parameter to take effect, a device reset is
required.
Defines the local Secured HTTPS port of the device. This
parameter allows secure remote device Web management from
the LAN. To enable secure Web management from the LAN,
configure the desired port.
The valid range is 1 to 65535 (other restrictions may apply within
this range). The default port is 443.
Note: For this parameter to take effect, a device reset is
required.
Defines the Cipher string for HTTPS (in OpenSSL cipher list
format). For the valid range values, refer to URL
http://www.openssl.org/docs/apps/ciphers.html.
The default is 'RC4:EXP' (Export encryption algorithms). For
example, use 'ALL' for all ciphers suites (e.g., for ARIA
encryption for TLS). The only ciphers available are RC4 and
DES, and the cipher bit strength is limited to 56 bits.
Notes:

For this parameter to take effect, a device reset is required.

If the installed Software License Key includes the Strong
Encryption feature, the default of this parameter is changed to
'RC4:EXP', enabling RC-128bit encryption.

The value 'ALL' can be configured only if the installed
Software License Key includes the Strong Encryption feature.
Determines the authentication mode used for the Web interface.

[0] Basic Mode =Basic authentication (clear text) is used.

[1] Web Based Authentication = (Default) Digest
authentication (MD5) is used.
Note: If you enable RADIUS login (i.e., the WebRADIUSLogin
parameter is set to 1), you must set the WebAuthMode
parameter to Basic Mode [0].
Determines whether client certificates are required for HTTPS
connection.

[0] Disable = (Default) Client certificates are not required.

[1] Enable = Client certificates are required. The client
certificate must be preloaded to the device and its matching
private key must be installed on the managing PC. Time and
date must be correctly set on the device for the client
certificate to be verified.
Notes:

For this parameter to take effect, a device reset is required.

For a description on implementing client certificates, see TLS
for Remote Device Management on page 99.
706
Mediant 500 E-SBC
Description
Document #: LTRT-10427