AudioCodes Mediant 500 E-SBC User Manual page 692

Enterprise session border controller digital voip media gateway
Hide thumbs Also See for Mediant 500 E-SBC:
Table of Contents

Advertisement

Parameter
EMS: DHCP Speed Factor
[DHCPSpeedFactor]
DHCP Servers Table
Web: DHCP Servers
Table
CLI: configure voip > dhcp
server <index>
[DhcpServer]
DHCP Vendor Class Table
Web: DHCP Vendor
Class table
CLI: configure voip > dhcp
vendor-class
[DhcpVendorClass]
DHCP Option Table
User's Manual
For this parameter to take effect, a device reset is required.
For a detailed description of DHCP, see ''DHCP-based Configuration
Server'' on page 569.
This parameter is a "hidden" parameter. Once defined and saved to
flash memory, its value doesn't revert to default even if the parameter
doesn't appear in the ini file.
Defines the device's DHCP renewal speed for a leased IP address from
a DHCP server.
[0] = Disable
[1] = (Default) Normal
[2] to [10] = Fast
When set to 0, the DHCP lease renewal is disabled. Otherwise, the
renewal time is divided by this factor. Some DHCP-enabled routers
perform better when set to 4.
Note: For this parameter to take effect, a device reset is required.
Defines the device's embedded DHCP server.
The format of the ini file table parameter is as follows:
[ DhcpServer ]
FORMAT DhcpServer_Index = DhcpServer_InterfaceName,
DhcpServer_StartIPAddress, DhcpServer_EndIPAddress,
DhcpServer_SubnetMask, DhcpServer_LeaseTime,
DhcpServer_DNSServer1, DhcpServer_DNSServer2,
DhcpServer_NetbiosNameServer, DhcpServer_NetbiosNodeType,
DhcpServer_NTPServer1, DhcpServer_NTPServer2,
DhcpServer_TimeOffset, DhcpServer_TftpServer,
DhcpServer_BootFileName, DhcpServer_ExpandBootfileName,
DhcpServer_OverrideRouter, DhcpServer_SipServer,
DhcpServer_SipServerType;
[ \DhcpServer ]
For a detailed description of this table, see Configuring the Device's
DHCP Server on page 181.
Defines Vendor Class Identifier (VCI) names (DHCP Option 60) for the
device's DHCP server. Only if the DHCPDiscover request message,
received from the DHCP client, contains this value does the device
provide DHCP services.
The format of the ini file table parameter is as follows:
[ DhcpVendorClass ]
FORMAT DhcpVendorClass_Index =
DhcpVendorClass_DhcpServerIndex,
DhcpVendorClass_VendorClassId;
[ \DhcpVendorClass ]
For a detailed description of this table, see Configuring the Vendor
Class Identifier on page 185.
692
Mediant 500 E-SBC
Description
Document #: LTRT-10427

Advertisement

Table of Contents
loading

Table of Contents