AudioCodes Mediant 500 E-SBC User Manual page 291

User's Manual
Parameter
Max Num Bodies
CLI: max-num-bodies
[MessagePolicy_MaxNumBodies]
Send Rejection
CLI: send-rejection
[MessagePolicy_SendRejection]
SIP Method Blacklist-Whitelist Policy
Method List
CLI: method-list
[MessagePolicy_MethodList]
Method List Type
CLI: method-list-type
[MessagePolicy_MethodListType]
SIP Body Blacklist-Whitelist Policy
Body List
CLI: body-list
[MessagePolicy_BodyList]
Body List Type
CLI: body-list-type
[MessagePolicy_BodyListType]
Version 6.8
Defines the maximum number of bodies (e.g., SDP) in the
SIP message.
The valid value is any number up to 8. The default is 8.
Determines whether the device sends a 400 "Bad
Request" response if a message request is rejected.

[0] Policy Reject = (Default) If the message is a request,
then the device sends a response to reject the request.

[1] Policy Drop = The device ignores the message
without sending any response.
Defines SIP methods (e.g., INVITE\BYE) to blacklist or
whitelist.
Multiple methods are separated by a backslash (\). The
method values are case-insensitive.
Defines the policy (blacklist or whitelist) for the SIP
methods specified in the 'Method List' parameter (above).

[0] Policy Blacklist = The specified methods are
rejected.

[1] Policy Whitelist = (Default) Only the specified
methods are allowed; the others are rejected.
Defines the SIP body type (i.e., value of the Content-Type
header) to blacklist or whitelist. For example,
application/sdp.
The values of this parameter are case-sensitive.
Defines the policy (blacklist or whitelist) for the SIP body
specified in the 'Body List' parameter (above).

[0] Policy Blacklist =The specified SIP body is rejected.

[1] Policy Whitelist = (Default) Only the specified SIP
body is allowed; the others are rejected.
291
18. SIP Definitions
Description
Mediant 500 E-SBC