AudioCodes Mediant 500 E-SBC User Manual page 127

User's Manual
Note:
table. If the domain name is not configured in the table, the device performs a DNS
resolution using an external DNS server for the related IP network interface (see
''Configuring IP Network Interfaces'' on page 113).
The following procedure describes how to configure the DNS table in the Web interface.
You can also this using the table ini file parameter, DNS2IP or CLI command, configure
voip > voip-network dns dns-to-ip.

To configure the internal DNS table:
1. Open the Internal DNS Table page (Configuration tab > VoIP menu > Network >
DNS > Internal DNS Table).
2. Click Add; the following dialog box appears:
Figure 12-10: Internal DNS Table - Add Record Dialog Box
3. Configure the DNS rule, as required. For a description of the parameters, see the
table below.
4. Click Submit; the DNS rule is added to the table.
Parameter
Domain Name
CLI: domain-name
[Dns2Ip_DomainName]
First IP Address
CLI: first-ip-address
[Dns2Ip_FirstIpAddress]
Second IP Address
CLI: second-ip-address
[Dns2Ip_SecondIpAddress]
Third IP Address
CLI: third-ip-address
[Dns2Ip_ThirdIpAddress]
Fourth IP Address
CLI: fourth-ip-address
[Dns2Ip_FourthIpAddress]
Version 6.8
The device initially attempts to resolve a domain name using the Internal DNS
Table 12-15: Internal DNS Table Parameter Description
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Defines the first IP address (in dotted-decimal format notation) to
which the host name is translated. The IP address can be
configured as an IPv4 and/or IPv6 address.
Defines the second IP address (in dotted-decimal format notation)
to which the host name is translated.
Defines the third IP address (in dotted-decimal format notation) to
which the host name is translated.
Defines the fourth IP address (in dotted-decimal format notation) to
which the host name is translated.
Description
127
12. Network
Mediant 500 E-SBC