AudioCodes Mediant 500 E-SBC User Manual page 473

User's Manual

To configure a Classification rule:
1. Open the Classification Table page (Configuration tab > VoIP menu > SBC >
Routing SBC > Classification Table).
2. Click Add; the following dialog box appears:
3. Configure the Classification rule according to the parameters described in the table
below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 28-4: Classification Table Parameter Descriptions
Parameter
Index
[Classification_Index]
Classification Name
CLI: classification-name
[Classification_ClassificationName]
Matching Characteristics - Rule
Message Condition
CLI: message-condition
[Classification_MessageCondition]
Source SRD ID
CLI: src-srd-id
[Classification_SrcSRDID]
Source IP Address
CLI: src-ip-address
Version 6.8
Figure 28-6: Classification Table Page
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the
Classification rule.
The valid value is a string of up to 20 characters. By default,
no name is defined.
Assigns a Message Condition rule, which can be used to
classify the incoming SIP dialog. To configure Condition
rules, see ''Configuring Message Condition Rules'' on page
476.
Defines an SRD ID of the incoming SIP dialog. To configure
SRDs, see ''Configuring SRDs'' on page 254.
By default, no SRD is defined.
Note: The SRDs are also associated with a port number as
defined by the SIP Interface used by the SRD (see
''Configuring SIP Interfaces'' on page 256).
Defines the source IP address (in dotted-decimal notation)
of the incoming SIP dialog.
473
28. SBC Configuration
Description
Mediant 500 E-SBC