Bypassing The Firewall To Access Hosts On Lan - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
C.3

Bypassing the Firewall to Access Hosts on LAN

C.3.1 Scenario
There are times when remote access to computers on the LAN is desirable; for example,
when hosting web sites, online businesses,FTP download and upload areas, etc.In such
cases, it may be appropriate to create an inbound NAT mapping for the network to allow
some hosts on the LAN to be accessible from outside of the firewall.
C.3.2 Solution
The web admin interface can be used to add an inbound NAT mapping to a host and to
bind the host to the WAN connection(s) of your choice. To begin, navigate to
Network>NAT Mappings.
In this example, the host with an IP address of 192.168.1.102 is bound to 10.90.0.75 of
WAN1:
ClickSave and thenApply Changes, located atthe top right corner, to complete the
process.
http://www.peplink.com -241 / 258 - Copyright © 2015 Peplink