Cli (Command Line Interface Support) - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series

25.5 CLI (Command Line Interface Support)

The serial console connector with the Peplink Balance 305, 380 HW rev 5, Peplink
Balance 580, Peplink Balance 710 HW rev 2, Peplink Balance 1350, Peplink Balance
2500, and MediaFast 200 and 500 is RJ-45.To access the serial console port, prepare a
RJ-45 to DB-9 console cable. Connect the RJ-45 end to the unit's console port and the
DB-9 end to a terminal's serial port. The port setting will be 115200,8N1.
The serial console connector with the Peplink Balance 305, 380 HW rev 1 to 4, Peplink
Balance 710 HW rev 1 is DB-9 male connector.To access the serial console port,
connect a null modem cable with a DB-9 connector on both ends to a terminal with the
port setting of 115200,8N1.
http://www.peplink.com -220 / 258 - Copyright © 2015 Peplink