USER MANUAL
Peplink Balance Series
24 System Settings
24.1 Admin Security
There are two types of user accounts available for accessing the web
admin:admin and user.They represent two user levels: the admin level has full
administration access, while the user level is read-only. The user level can access only
the device's status information;users cannot make any changes on the device.
Admin account
User account
UI
UI
A web login session will be logged out automatically when it has been idle longer than
the Web Session Timeout.Before the session expires, you may click the Logout
button in the web admin to exit the session.
0 hours 0 minutes signifies an unlimited session time. This setting should be used only
in specialsituations, as it will lower the system security level if users do not logout before
closing the browser.
Default: 4 hours 0 minutes.
For security reasons, after logging in to the web admin Interface for the first time, it is
recommended to change the administrator password. Configuring the administration
interface to be accessible only from the LAN can further improve system
security.Administrative settings configuration is located atSystem>Admin Security.
http://www.peplink.com
-202 / 258 -
Copyright © 2015 Peplink