Pptp Server - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series

22.2 PPTP Server

The Peplink Balance has a built-in PPTP server, which enables remote computers to
conveniently and securely access the local network. PPTP server settingsare located
atNetwork>Misc. Settings>PPTP Server.
Simply check the box to enable the PPTP server functionality. All connected PPTP
sessions are displayed at Status>Client List.Please refer to Section 26.3 for details.
This setting is for specifying the WAN connection(s) and IP address(es) that the PPTP
Listen On
server should listen on.
(This option is only applicable on Peplink Balance 305/380+ and MediaFast 200+.)
This setting is for specifying the user database source for PPTP authentication. Three
sources can be selected: Local User Accounts, LDAP Server, orRADIUS Server.
Local User Accounts - User accounts are stored in the Peplink Balance locally. You can
add/modify/delete accounts in the User Accounts table below.
Authentication
LDAP Server - Authenticate with an external LDAP server. Tested with OpenLDAP server
where passwords are NTLM hashed. Active Directory is not supported. (You can choose to
use RADIUS to authenticate with a Windows Server.)
http://www.peplink.com
PPTP Server Setting
-180 / 258 - Copyright © 2015 Peplink