Nat Mappings - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
17

NAT Mappings

The Peplink Balance allows the IP address mapping of all inbound and outbound
NAT'edtraffic to and from an internal client IP address.
NAT mappings can be configured atNetwork>NAT Mappings.
To add a rule for NAT mappings, clickAdd NAT Ruleand the following screen will be
displayed:
LAN
NAT Mapping rules can be defined for a single LAN IP Address, an IP Range, or an IP
Client(s) Network.
This refers to the LAN host's private IP address.The system maps this address to a
Address
number of public IP addresses (specified below) in order to facilitate inbound and
outbound traffic.This option is only available when IP Address is selected.
The IP range is a contiguous group of private IP addresses used by the LAN host. The
Range
system maps these addresses to a number of public IP addresses(specified below) to
facilitate outbound traffic.This option is only available when IP Range is selected.
http://www.peplink.com
NAT Mapping Settings
-157 / 258 - Copyright © 2015 Peplink