Product Features; Supported Network Features - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
4

Product Features

Peplink Balance series products enable all LAN users to sharebroadband Internet
connections and provide advanced features to enhance Internet access. The following
is a list of supported features:
4.1

Supported Network Features

4.1.1 WAN

Multiple public IP support (DHCP, PPPoE, static IP address)

Static IP support for PPPoE

10/100/1000Mbps Ethernet connection in full/half duplex

Built-in HSPA and EVDO cellular modems (available on Peplink Balance 30
LTE)

USB mobile connection(only one USB modem can be connected at a time)

Drop-in mode on selectable WAN port with MAC address passthrough(available
on Peplink Balance 210+)

Network address translation (NAT) / port address translation (PAT)

Inbound and outbound NAT mapping

Multiple static IP addresses per WAN connection

MAC address clone

Customizable MTU and MSS values

WAN connection health check

Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-
ip.org,tzo.com, and DNS-O-Matic)

Ping, DNS lookup,and HTTP-based health check
4.1.2 LAN

DHCP server on LAN

Extended DHCP option support

Static routing rules

Local DNS proxy server

VLAN on LAN support
4.1.3 VPN

Secure SpeedFusion

SpeedFusion performance analyzer

X.509 certificate support (feature activation required on Peplink Balance 20,
30, 30 LTE, and 50; included on Peplink Balance 210+)

Bandwidth bonding andfailover among selected WAN connections

Ability to route traffic to a remote VPN peer
http://www.peplink.com
TM
(available on Peplink Balance 210+)
-19 / 258 - Copyright © 2015 Peplink