Inbound Access Services - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series

16.3 Inbound Access Services

16.3.1 Definition of Services
Services are defined atNetwork>Inbound Access>Services.
At least one server must be definedbefore services can be added.
To define a new service, click the Add Servicebutton, upon which the following menu
appears:
This setting specifies whether the inbound service rule takes effect.
When Yes is selected, the inbound service rule takes effect. If the inbound traffic matches the
specified IP protocol and port, action will be taken by the Peplink Balance based on the other
Enable
parameters of the rule.
When No is selected, the inbound service rule does not take effect. The Peplink Balance will
disregard the other parameters of the rule.
http://www.peplink.com
Tip
Services Settings
-133 / 258 - Copyright © 2015 Peplink