Cputest; Dmatest; Teste - Broadcom 5720ZG User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.114

cputest

cmd: cputest
Description: TX / RX CPU Test. This test needs an input CPU file in the same location as
b57diag.exe. The default file name is cpu.bin or cpu05.bin unless specified by –f option.
Syntax: cputest [iteration]
Options:
-f<string>
-n<DEC>
10.115

dmatest

cmd: dmatest
Description: DMA Test
Syntax: dmatest [iteration]
Options:
-4
-a<HEX>
-d
-f
-l<HEX>
-n<DEC>
-o<HEX>
10.116

teste

Command: teste
Description: The command enables tests. It effects nictest, regtest, pkttest, and memtest
commands. The test must starts with test group alpha (a-d). If no number is
entered, all tests in that group are enabled.
Syntax: teste [<tests> [<tests>...]]
input filename
iteration (The default iteration is 1. 0 means run forever)
Allocate 4k-aligned buffers
NIC address (def=00002100)
Display DMA info.
Force to use 32-bit bus
Length of DATA to do DMA (def=00000400)
iteration
Buffer offset (def=00000000)
page 104
Broadcom Confidential and Proprietary