Setest; Bist; Nictest - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-s
-x
10.109

setest

cmd: setest
Description: Run NVRAM Test
Syntax: setest [iteration]
Options:
-e
-d<HEX>
-n<DEC>
-q
-r
-s<HEX>
10.110

bist

cmd: bist
Description: Run BIST. The default iteration is 1. 0 means run forever.
Syntax: bist [iteration]
10.111

nictest

cmd: nictest
Description: Run a set of NIC Tests. NIC test can include memory test, serial eeprom test,
interrupt test, packet exchange, MAC registers test, Mii registers test, cpu test, dma test.
This test can to be configured by running "diagcfg". See "diagcfg" for details. If a "test
list" is not entered below then a set of default tests are run.
Syntax: nictest [test list]
abcd -- runs all tests
b -- runs all test in group B
Test Scratch Pad
Test MBUF SRAM via DMA
extensive test
ending offset (with -e option) (def=FFFFFFFF)
iteration
quiet mode
read only test
start offset (with -e option) (def=00000000)
page 102
Broadcom Confidential and Proprietary