Chapter 4
Component Expansion/Function Enhancement
4.1
Installing Additional Drives
■
About Shock
4.1.3
Additional Drive Installation Procedure
This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
Do Not
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
•
Do
•
If components are installed in a way other as described in this section, damage
and/or device failure or electrical shock may occur.
Do Not
•
Do not install drives that are for use in other devices.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
46
P3AM-9012-01ENZ0