5.
Component Expansion/Function Enhancement
Installing Additional Drives
■
About Shock
Additional Drive Installation Procedure
This section explains how to install optional drives in the ETERNUS AF.
Drives can be installed in any slots.
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of the
ETERNUS AF are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
•
Do not knock or drop the drives on hard objects.
•
If components are installed in a way other as described in this section, damage and/or
device failure or electrical shock may occur.
Do not install drives that are for use in other devices.
•
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
49
P3AG-1842-06ENZ0