Additional Drive Installation Procedure - Fujitsu ETERNUS AF S3 Series Basic Operation Manual

4. Component Expansion/Function Enhancement
Installing Additional Drives

Additional Drive Installation Procedure

This section explains how to install optional drives in the ETERNUS AF.
Drives can be installed in any slots.
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS AF are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Tab
IMPORTANT
Keep the removed dummy drive units in a safe place where they will not be lost.
• If components are installed in a way other than as described in this section,
damage and/or device failure or electrical shock may occur.
• Do not install drives that are for use in other devices.
Dummy drive unit
32 Operation Guide (Basic)