Save/Load A Show; Save Show List; Load Show List; Save A Single Show - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

4. Save/Load a Show

Save Show List

01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <C> [Save Show List].
04) Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.
05) After naming the file, press <Enter> to save.

Load Show List

01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <D> [Load Show List].
04) Select the desired show list and press <Enter> to start loading.

Save a Single Show

01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <A> [Show List] and select the show.
04) Press <D> [Save&Load Show] and press <A> [Save Show].
05) Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.
06) After naming the file, press <Enter> to save.

Load a Single Show

01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <A> [Show List] and select the show.
04) Press <D> [Save&Load Show] and press <B> [Load Show].
05) Press <Enter> to load.

Setup

Press <Setup> to enter the following options:
1. Save & Load
To save data to and load data from a USB memory stick.
 Save data: Enter Save Data menu, turn the Wheel V to set the characters. Press <Up> and <Down>
to move the cursor. Press <Delete> to delete a character. After naming, insert a USB memory stick
and press <Enter> to save the data.
 Load data: Insert a correct USB memory stick. Select the desired data from the list that appears on
the screen. Press <Up> and <Down> to browse. Press <A-E> to select the desired option.

2. Wipe Data

 Wipe Playback: Only the data in the playback area will be wiped off. Other data will remain.
 Wipe Palette: Only the data in the palette area will be wiped off. Other data will remain.
 Wipe All: Data of playback, palette and patch will all be wiped off. But, the library data will remain.

3. Select Language

There are two language versions available on the Creator: Chinese and English.
Ordercode: 50731
35