Related Manuals for SHOWTEC 44050
Summary of Contents for SHOWTEC 44050
- Page 1 MANUAL ENGLISH EventSpot 1600 Q4 Ordercode: 44050 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
6.5. DMX Sync ................................23 6.6. Lock ..................................24 6.7. Calibration .................................24 6.8. Factory ................................24 7. Information ................................25 Optional remote control ............................25 Auto program ................................26 Built-in programs ...............................26 Manual mode ................................26 DMX Channels ................................27 4 Channels ................................27 6 Channels ................................27 10 Channels ................................27 Ordercode: 44050... - Page 3 EventSpot 1600 Q4 Maintenance ..................................29 Troubleshooting ................................30 No Light ..................................30 No Response to DMX ..............................30 Product Specifications ..............................32 Dimensions ..................................33 Notes ....................................34 Ordercode: 44050...
-
Page 4: Warning
Please consider that damages caused by manual modifications to the device are not subject to warranty. This device contains no user-serviceable parts. Refer servicing to qualified technicians only. Ordercode: 44050... - Page 5 For replacement, use fuses of same type and rating only. ● The user is responsible for correct positioning and operating of the Showtec EventSpot 1600 Q4. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
-
Page 6: Operating Determinations
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety cable. ● When rigging, derigging or servicing the device, always make sure, that the area below the installation place is blocked and staying in the area is forbidden. Ordercode: 44050... -
Page 7: Connection With The Mains
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always connected properly to the earth! Improper installation can cause serious damage to people and property! Ordercode: 44050... -
Page 8: Return Procedure
After this period, complaints will not be handled anymore. Complaints will only be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting. Ordercode: 44050... -
Page 9: Description Of The Device
EventSpot 1600 Q4 Description of the device Features The EventSpot 1600 Q4 is a wireless LED Eventspot by Showtec. ● Long battery life ● Eco mode for extended battery life ● IP54 for outdoor use ● Wireless DMX by Wireless Solutions Sweden ●... -
Page 10: Overview
03) OLED display + control buttons Bottom Fig. 02 04) Dedicated 3-pin DMX signal connector IN IP54 05) Power button ON/OFF 06) Dedicated 3-pin DMX signal connector OUT IP54 07) Quick lock mounting hole 08) Battery charger socket Ordercode: 44050... -
Page 11: Backside
06) Plug the other end of the PowerCON to Schuko power cable into a proper electric power supply socket. 07) Charge the battery (6 hours). 08) The four LED indicators from the charger will light up green when the EventSpot is fully charged. Ordercode: 44050... -
Page 12: Control Modes
See page 20 for more information about Auto program. One EventSpot (Built-in programs) When the EventSpot is not connected by a DMX cable and Wireless DMX is switched off, it functions as a stand-alone device. See pages 20–21 for more information about Built-in programs. Ordercode: 44050... -
Page 13: Multiple Eventspots (Master/Slave Control)
20-21 (Manual, Auto program or Built-in programs). This means you can set your desired operation mode on the master device and all slave devices will react the same as the master device. Multiple EventSpots (Master/Slave control) Fig. 05 Ordercode: 44050... -
Page 14: Multiple Eventspots (Dmx Control)
Link the units as shown in (Fig. 06). Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit's "in" socket. Repeat this process to link the second, third and fourth units. Multiple EventSpots DMX Setup Fig. 06 Ordercode: 44050... -
Page 15: Multiple Eventspots (Wireless Dmx Control)
04) When there is a connection, the W-DMX LED indicator (C) from the EventSpot will light up green. 05) Use a DMX-cable to link the transmitter with a suitable lightcontroller. Setup example wireless DMX Fig. 07 Ordercode: 44050... -
Page 16: Connect The Eventspot 1600 Q4 To The Wireless Dmx Signal Transmitter
Disconnect from the Wireless DMX signal transmitter The EventSpot 1600 Q4 can be disconnected from the wireless DMX signal transmitter. You can turn off/unlink the W-DMX if you press the W-DMX button (H) for 3 seconds. The EventSpot will be disconnected. Ordercode: 44050... -
Page 17: Fixture Linking
FL083 (3 m), FL086 (6 m), FL0810 (10 m), FL0820 (20 m). ● DAP Audio DMX adapter: 5-pin > 3-pin. Ordercode FLA29. ● DAP Audio DMX adapter: 3-pin > 5-pin. Ordercode FLA30. ● DAP Audio DMX Terminator 3-pin. Ordercode FLA42. ● DAP Audio DMX Terminator 5-pin. Ordercode FLA43. Ordercode: 44050... -
Page 18: Control Panel
When no button is pressed for 60 seconds, the display will turn off. To light up the display, you have to press the MODE, SET, UP or DOWN button. Once you have pressed the button, the display will light up. Ordercode: 44050... -
Page 19: Menu Overview
EventSpot 1600 Q4 Menu overview Ordercode: 44050... -
Page 20: Main Menu Options
6 Channels 10 Channels 08) If you choose Signal, press the SET button to open the submenu: 09) Press the UP/DOWN buttons to select normal DMX or wireless DMX mode. 10) Press the SET button to confirm your choice. Ordercode: 44050... -
Page 21: Manual
06) Press the UP/DOWN buttons to choose one of the 33 preset colors. 07) If you have chosen strobe frequency , press the SET button to open the submenu. 08) Press the UP/DOWN buttons to set the desired strobe frequency. The adjustment range is between 0– Ordercode: 44050... -
Page 22: Master/Slave
02) Press the SET button to open the menu. The display will show: 03) Press the UP/DOWN buttons to scroll through the following menus: Curves Select, Dimmer Speed, DMX Fail, Working Time, DMX Sync, Lock, Calibration and Factory. Ordercode: 44050... -
Page 23: Curves Select
01) Press the UP/DOWN buttons until the display shows Dimmer Speed. 02) Press the SET button to open the menu. The display will show: 03) Press the UP/DOWN buttons to choose between Fast or Smooth. 04) Press the SET button to confirm your choice. Ordercode: 44050... -
Page 24: Dmx Fail
04) The Sync option is a tool which helps to keep multiple fixtures synchronized, when using them in Master/Slave mode. 05) If you choose On, the synchronization will be active (recommended). 06) If you choose Off, the synchronization will be off. 07) Press the SET button to confirm your choice. Ordercode: 44050... -
Page 25: Lock
03) Press the UP/DOWN buttons to select Yes or No. ● If you choose Yes, the device will reset to its factory default settings. ● If you choose No, the device will keep current settings. 04) Press the SET button to confirm your choice. Ordercode: 44050... -
Page 26: Information
Auto Activates Auto program Program Activates Built-in programs No function Speed Activates Program speed mode Strobe Activates Strobe frequency mode Dimming Activates Manual Color mode Plus Increase button Minus Decrease button Activates Red color Green Activates Green color Ordercode: 44050... -
Page 27: Auto Program
Manual mode. 02) Press the button to choose one of the RGBW colors. 03) Press the buttons to set the intensity of the individual colors between 0–255. 04) In this mode you can create your desired color. Ordercode: 44050... -
Page 28: Dmx Channels
Channel 2 – Strobe CH1 and CH3, CH4, CH7, CH8, CH9 or CH10 must be set between 1–255 0–10 Closed 11–128 Random strobe, from slow to fast 129–255 Strobe flash frequency, from low to high frequency (0–15 Hz) Ordercode: 44050... - Page 29 Fade 1 160–175 Fade 2 176–191 Fade 3 192–207 Fade 4 208–223 Fade 5 224–239 Fade 6 240–255 Fade 7 Channel 5 – Speed Built-in programs CH4 must be set between 16–255 0–255 Speed adjustment, from fast to slow Ordercode: 44050...
-
Page 30: Maintenance
The front lens will require weekly cleaning, as smoke fluid tends to build up residues, reducing the light output very quickly. Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power. Ordercode: 44050... -
Page 31: Troubleshooting
05) If you are unable to determine the cause of the problem, do not open the EventSpot, as this may damage the unit and the warranty will become void. 06) Return the device to your Showtec dealer. No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. - Page 32 Turn up the air conditioning cuts out intermittently ● Disconnect the fixture and return LEDs damaged it to your dealer The power supply settings do not ● Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 44050...
-
Page 33: Product Specifications
EventSpot 1600 Q4 Product Specifications Model: Showtec EventSpot 1600 Q4 Input voltage: 100–240 V AC, 50/60 Hz Drive current: 650 mA Refresh rate: 12 kHz Battery storage: 15,6 Ah Operating time at Full On: 8 hours Operation temperature: -10 °C to +40 °C... -
Page 34: Dimensions
EventSpot 1600 Q4 Dimensions Ordercode: 44050... -
Page 35: Notes
EventSpot 1600 Q4 Notes Ordercode: 44050... - Page 36 ©2019 Showtec...