Manually Controlling The Chase Step; Add A Step; Unfold A Chase For Editing; Include The Data Of A Chase Step - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

6. Manually Controlling the Chase Step

Press <Stop> to control the chase manually. If the chase is set as "Link = Close", it will automatically
change to manual control. For more information about "Link," see below.
 Press <Go+> or <Go-> to restart the chase.

7. Add a Step

To add a step is similar to edit a chase step. Press <Chase> and press the playback button of a chase,
then follow the steps for recording a new step. The new step will be recorded as the last step in the
chase.

8. Unfold a Chase for Editing

Press <Unfold> to unfold the steps of a chase to the playback buttons; each step functions like a scene
for separate running and editing.
01) Press <Unfold> and press the desired playback button, for editing.
02) The first 20 steps of the chase will be applied to the playback buttons 1-20.
03) Move a playback fader up or press the playback button to output the step data.
04) The options of the unfolded Chase menu are described below.
05) Press <Unfold> again to exit the mode.
 Edit a step: Press <Clear> to clear the programmer. Move up the fader or press the button to modify.
Press <A> [Save a step] then press a playback button 1-20.
 Adjust the step time, press <B> [Edit Time] and press a playback button. Then, adjust the time.
 To insert a new step, you need to set the effects of the new step first. Press <C> [Insert a Step] and
press the playback button which you want to add it to. The new step will be inserted and the
following steps will be pushed back by one step.
 To delete a step, press <Delete>, then and press the desired playback button. Press <Enter> to
confirm.
 To copy a step, press <Clear> and press <Copy/Include>, then press the desired step to send its data
to the programmer and save.
 If there are more than 20 steps in the chase, press <Up> or <Down> to turn the pages.
 Press <E> [Shape Generator], to add a shape in the chase.

9. Include the Data of a Chase Step

01) Press <Copy/Include>.
02) Press the button of a scene/chase that you want to copy from.
03) Press the button of the target chase.

10. Delete a Chase

Deleting a chase works the same as to deleting a scene. Press the blue <Delete>, then press the desired
playback button twice.

11. Delete a Chase Step

Press <Unfold> to unfold a chase and press <Delete>. Then, press the desired playback button to delete.

12. Adjust Speed and Fade Time with Wheels

Wheels A/B control the speed of the fade time of the most recent chase. Press <Connect> to connect to
other chases for control: Press <Connect>, then press the desired playback button of a chase.

13. The Global Time of a Chase.

01) Press <C> [Edit Time] and choose the desired chase by pressing one of the playback buttons.
02) Press <Up> or <Down> to turn the pages. Press <A-E> to select the desired option. Turn the Wheel V to
adjust the value.
03) The time options include (see the chart on the next page):
 Wait In: The wait time before an HTP channel fading in
 Fade In: The fade in time of an HTP channel
 Wait Out: The wait time before an HTP channel fading out
 Fade Out: The fade out time of an HTP channel
Ordercode: 50731
31