Personality Builder; Interface Of The Personality Builder; How To Create A New Personality (Library) - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

Personality Builder

With the Personality Builder you can create and edit the fixture library (Personality). The library file must be
placed in the root directory of a FAT32 USB memory stick.

1. Interface of the Personality Builder

2. How to create a new Personality (Library)

01)
Select your language.
02)
Press [New] to create a new personality or press [load] to load an existing personality.
03)
Enter the name of the personality. The name of the file should not consist of more than 12 characters.
Do not use spaces between words!
04)
Select the tags with blue background. Normally, you can keep the default configurations in the tag
but it is possible to change them, too. Please note, that the pan/tilt tags cannot be changed.
05)
Enter the channel value in Attribute Setting column and select the channel type. If the desired
channel type is not on the list, you can select "Generic." Enter the attribute name. The name of the
file should not consist of more than 12 characters. Do not use spaces between words!
06)
Normally, you should keep the value of Locate function unchanged. However, in case of LED par
lights, the value to locate the strobe is usually set to 0. Refer to the manual of the LED par fixture in
question.
07)
Set up Instant and Invert (under normal circumstances, keep it unchanged).
08)
Press <Clear> to reset the HTP channel to 0 or to the value indicated by the playback fader position.
This option is mostly used with the built-in program channel of a LED fixture.
09)
Repeat from step 4 to set up another attribute.
10)
Some fixtures are equipped with the lamp ON/OFF and reset functions. These can be found in
Macros section. Enter the channel number of every channel in the Channel column. Enter the
functional value in the Value column.
11)
Save the personality.
Ordercode: 50731
38