Table of Contents
Advertisement
Creator 1024 PRO
No Response to DMX
Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction.
01) Check the DMX setting. Make sure that DMX addresses are correct.
02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical
power. Try your DMX control again.
03) Determine whether the controller or light effect is at fault. Does the controller operate properly with
other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light
effect to a qualified technician.
Playback Buttons Do Not Respond to Commands
Please check MIDI status in Setup menu. MIDI Slave mode will disable the playback buttons and the
device will respond only to MIDI master commands.
Product Specifications
DMX channel
Fixture
Re-patched fixture address
Swop Pan/Tilt
Reversed channel output
Channel slope modification
Channels for each fixture
Library
Scene
Scenes to run simultaneously
Total scene steps
Time control of scenes
Shapes for each scene
Scene and dimmer by slider
Swop scene
Flash scene
Shape generator
Shapes to run simultaneously
Master slider
Real time blackout
Channel value by wheel
Channel value by slider
Dimmer by slider
USB memory
Fuse:
Dimensions:
Weight:
Design and product specifications are subject to change without prior notice.
Ordercode: 50731
1024
80
Yes
Yes
Yes
Yes
40 primary + 40 fine tune
Avolite Pearl R20 library supported
600
20
600
Fade IN/OUT, LTP slope
5
Yes
Yes
Yes
Shapes of Dimmer, Pan/Tilt, RGB, CMY,
Color, Gobo, Iris and Focus
10
Global, playback, fixture
Yes
Yes
Yes
Yes
FAT32 supported
F1L/250V
655 x 550 x 135 mm (LxWxH)
12,6 kg
Website:
www.Showtec.info
Email:
service@highlite.nl
41
Hide quick links:
Advertisement
Table of Contents
