Related Manuals for SHOWTEC Sunstrip Active MKII 110V V1
Summary of Contents for SHOWTEC Sunstrip Active MKII 110V V1
- Page 1 MANUAL ENGLISH Sunstrip Active MKII 110V V1 Ordercode: 30751 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Sunstrip Active MKII 110V Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Optional accessories..............................7 Frontside.................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Sunstrip Active 110V ● 2 brackets incl. screws ●... - Page 4 Sunstrip Active MKII 110V IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. ● Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution! ●...
-
Page 5: Operating Determinations
Sunstrip Active MKII 110V ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. ● For adult use only. The device must be installed beyond the reach of children. Never leave the unit running unattended. -
Page 6: Connection With The Mains
Sunstrip Active MKII 110V The Sunstrip Active MKII 110V can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. -
Page 7: Return Procedure
Sunstrip Active MKII 110V Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the... -
Page 8: Description Of The Device
Sunstrip Active MKII 110V Description of the device Features The Sunstrip Active 110V is a 110V version of the already popular Sunstrip Active MKII. It is the most versatile fixture including 10 pcs Sunstrip lamp GU10. This Sunstrip is specially designed for countries which have a 110V power connection. -
Page 9: Backside
Sunstrip Active MKII 110V Backside Fig. 02 04) 3-pin DMX signal connector OUT 05) Neutrik Powercon Thru (Grey, Max 20A) 06) Ground/Earth connection 07) 4-digit LED display + menu buttons 08) Fuse 6A/250V 09) Powerswitch ON/OFF 10) Neutrik Powercon IN (Blue, Max 20A) 11) 3-pin DMX signal connector IN Installation Remove all packing materials from the Sunstrip Active MKII 110V. -
Page 10: Installing The Lamp
Sunstrip Active MKII 110V Installing the Lamp The Showtec Sunstrip Active MKII 110V uses a 110V/50W GU10 bulb (Ordercode: SPHK498) as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. -
Page 11: Set Up And Operation
Sunstrip Active MKII 110V Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply. -
Page 12: Fixture Linking
Sunstrip Active MKII 110V Multiple Sunstrips Active DMX Set Up Fig. 09 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. -
Page 13: Control Panel
Sunstrip Active MKII 110V Control Panel A) LED display Mode button C) Menu button D) Up button Down button Fig. 04 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address, next time.) DMX Addressing The control panel on the back side of the device allows you to assign DMX fixture addresses, which is the... -
Page 14: Menu Overview
Chase direction Chase speed Chase dimmer The Sunstrip Active MKII 110V will show Showtec at start-up ! The text will remain in the display for 30 seconds. 1. DMX Mode With this mode you can set the DMX address and choose a DMX configuration. -
Page 15: Dmx Configuration
Sunstrip Active MKII 110V 1.2 DMX configuration 01) Press the Menu button (in DMX Mode), until the display shows 02) You can choose 4 different DMX configurations. 03) Press the Up/Down buttons to select the required DMX configuration. 1 DMX channel 2 DMX channels 5 DMX channels 10 DMX channels... -
Page 16: Edit Welcome Text
Sunstrip Active MKII 110V Edit welcome text The default text is Showtec, with this function you can create your own welcome text. 01) Press and hold the Mode button for 5 seconds, until the display starts blinking. 02) Now press and hold the Mode button, while pressing the following buttons in sequence: Up, Up, Down, Down, Up, Down to enter the Edit mode. -
Page 17: Dmx Channels
Sunstrip Active MKII 110V 5 DMX channels Channel 1 – Dimmer intensity section 1 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Dimmer intensity section 2 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 3 – Dimmer intensity section 3 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 4 –... -
Page 18: Dmx Channels
Sunstrip Active MKII 110V 10 DMX channels Channel 1 – Dimmer intensity LED 1 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Dimmer intensity LED 2 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 3 – Dimmer intensity LED 3 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 4 –... -
Page 19: Changing The Lamp
05) If you are unable to determine the cause of the problem, do not open the Sunstrip Active, as this may damage the unit and the warranty will become void. 06) Return the device to your Showtec dealer. No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. - Page 20 Sunstrip Active MKII 110V Problem Probable cause(s) Solution No power to the fixture • Check if power is switched on and One or more cables are plugged in fixtures do not function at all Primary fuse blown • Replace fuse Fixtures reset The controller is not connected.
-
Page 21: Product Specifications
Sunstrip Active MKII 110V Product Specifications Model: Showtec Sunstrip Active MKII 110V Input Voltage: 110 VAC, 60Hz Power consumption: 500W (full output) DMX linking: 30 pcs Power linking 3 pcs Protection rate: IP-20 Fuse: F10A/250V Dimensions: 1080 x 130 x 130 mm (LxWxH) (incl. brackets) -
Page 22: Dimensions
Sunstrip Active MKII 110V Dimensions Leftside Rightside Ordercode: 30751... -
Page 23: Notes
Sunstrip Active MKII 110V Notes Ordercode: 30751... - Page 24 ©2020 Showtec...