Storing A Palette; Recalling A Palette Value; Palettes In Playback; Delete A Palette - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

5. Storing a Palette

This is how you save a palette value:
01) Press <Clear> to clear the programmer.
02) Select the fixtures for which you want to store palette values. Select one fixture only to record a
shared palette entry.
03) Using the attribute buttons and wheels, set the attributes you want in the palette entry. You can store
any or all attributes of a fixture in each palette entry. Only attributes you have changed will be
recorded.
04) Press the attribute button for the attributes you want to store (the dimmer button will store all
attributes). The buttons light up to show you which attributes are going to be recorded. It's best to
save only one type of attribute (e.g. Tilt/Pan).
05) Press <Store Palette>, then press one of the palette buttons, to save.

6. Recalling a Palette Value

To recall a palette value, this is what you do:
01) Select the fixtures to be changed. Shared palettes can be set to any fixture of the same type.
Individual palettes will set individual values to each fixture.
02) Select the attributes you want to recall from the palette. The <Dimmer> attribute button will recall
everything stored in the palette (the LEDs on the buttons show you which attributes are active)
03) Press one of the palette buttons to recall it.
 It is easiest to save only one type of attribute (such as pan/tilt) into each palette, then you can just
leave the <Dimmer> attribute button selected when recalling the palette. If you store a mixture of
attributes, you always have to make sure that the correct attributes are selected when recalling a
palette and this is an extra step which you could do without.

7. Palettes in Playback

In firmware version 2.3.10., once a palette is recalled and stored in a playback, the playback will change
as the palette is changed. For example, if we have a palette or red color and store it in a playback, the
playback will output red. However, if we change the palette color from red to green and run the
playback again, the playback will output green.
 Due to the free space limit, we suggest to recall only one palette in each playback. If you recall
more palettes, it may cause a time lag. This issue will be addressed in the future update.
 This function can be disabled. While in the main menu, press <C> [Edit Time], press the desired
playback button, then press <Down> twice and, finally, press <E> to toggle between [Relate palette]
and [Not relate palette].

8. Delete a Palette

Press <Delete>, then, press <Palette> to delete.
Ordercode: 50731
19