Performance Settings; Settings Menu Safety Lock; Dmx Channel Modes; Save Dmx/Blackout - SHOWTEC 33036 Manual

Performer 2000 Fresnel DDT MKII

6.4. Performance Settings

01) When the display shows PERFORM, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 3 modes:
LIVE
STUDIO
POWER

6.5. Settings Menu Safety Lock

01) When the display shows SLOCK, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between ON and OFF to activate/deactivate the menu lock.
03) When the option is active, you will always need to insert the safety key/pass code in attempt to enter
the Settings menu.

6.6. DMX Channel Modes

With this menu you can set the desired DMX channel mode.
01) When the display shows PERSONALITY, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 3 channel modes:
UNO
DOS
STD.P

6.7. Save DMX/Blackout

01) When the display shows DMX ERROR, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options:
SAVE
BLACK
03) If the display shows SAVE, the Performer will utilize the last working DMX signal, which will ensure
undisrupted performance.
04) If the display shows BLACK, the Performer will black out the output, in case of a DMX signal error.

6.8. Reset Settings

01) When the display shows RESET, press the ENTER button to enter the menu. The display will show PASS
CODE.
02) Insert the safety key combination by pressing the buttons in the following order: UP, DOWN, UP,
DOWN, ENTER.
03) The display will promptly show OK! and the settings will have been reset.

6.9. Mode Setting

01) When the display shows MODE SETTING, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options:
SELF
MASTER
03) If the display shows SELF, the Performer will not send DMX data to the other connected devices.
04) If the display shows MASTER, the Performer will send DMX data to the other connected devices.
Ordercode: 33036
Default mode. It provides a compromise between output
quality and noise level.
Noise level-oriented mode. It emits little noise and operates at
moderate power level.
Output-oriented mode. The device does not offer any
consideration for noise level and operates at full power.
1-channel mode
2-channel mode
5-channel mode
DMX data save
Blackout
DMX data transfer OFF
DMX data transfer ON
21