Show Recording; Record A Show; Run A Show; Delete A Show - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

Show Recording

You can record the order of the playbacks and the interval time between the playbacks. The shows can
be played back after recording.

1. Record a Show

01) Press <Setup>.
02) Press <E> [Show Record].
03) Press <A> [Show List] and select the desired show to record.
04) Press <A> [Record Show].
05) Press <B> [Record] to highlight it.
06) Play chases and palettes back.
07) When the playbacks are finished, press <B> [Record] to dehighlight it.
08) Press <Enter> to end the show.
09) Now, adjust the time settings. To set the first playback as the starting time.
10) To keep the original time settings, press <E>.
 Duration time of the show will be shown after recording.
 It is possible to select the time code of the console or the time code of an external MIDI source. In
[Show Record] press <A> to toggle between those 2 options.

2. Run a Show

01) Press <Setup>.
02) Press <E> [Show Record].
03) Press <A> [Show List] and select the desired show to record.
04) Press <C> [Play Show].
05) Press<B> [Play] to highlight it.
 Once a show is running, the timer of its first line will start.
 Press >D> and <E> to adjust the rhythm of the show. It works only with the console time code. It does
not respond to MIDI.
 While playing, you can choose between the time code of the console or the time code from an
external MIDI source. While in [Show Record], press <A> to toggle between those 2 options.

3. Delete a Show

01) Press <Setup>.
02) Press <E> [Show Record].
03) Press <A> [Show List] and select the desired show to record.
04) Press <B> [Delete Show].
05) Press <Enter> to delete.
 To delete all programs, enter [Show Record], select [Clear Show List] and press <Enter>.
Ordercode: 50731
34