Safety Key; Dmx Data Transfer; Reset Settings; Save Dmx/Blackout - SHOWTEC Performer 1000 LED MKII Manual

Performer 1000 LED MKII

4.3. Safety key

01) When the display shows
02) Press the UP/DOWN buttons to toggle between
safety lock.
03) When the option is active, you will need to insert the safety key combination every time the display
turns off.

4.4. DMX data transfer

01) When the display shows
02) Press the UP/DOWN buttons to toggle between the 2 options:
03) If the display shows
04) If the display shows

4.5. Reset settings

01) When the display shows
.
02) Insert the safety key combination by pressing the buttons in the following order: UP, DOWN, UP,
DOWN, ENTER.
03) The display will promptly show

4.6. Save DMX/Blackout

01) When the display shows
02) Press the UP/DOWN buttons to toggle between the 2 options:
03) If the display shows
04) If the display shows
ensure undisrupted performance.

4.7. DMX channel modes

01) When the display shows
02) Press the UP/DOWN buttons to toggle between the 3 channel modes:

4.8. Settings lock

01) When the display shows
02) Press the UP/DOWN buttons to toggle between
03) When the display shows ON, you will need to insert the password (press UP, DOWN, UP, DOWN, ENTER)
to enter Settings menu.
Ordercode: 33035
, press the ENTER button to open the menu.
, press the ENTER button to open the menu.
DMX data transfer OFF
DMX data transfer ON
, the Performer will not send DMX data to the other connected devices.
, the Performer will send DMX data to the other connected devices.
, press the ENTER button to enter the menu. The display will show
and the settings will have been reset.
, press the ENTER button to open the menu.
Blackout
DMX data save
, the Performer will blackout the output, in case of the DMX signal error.
, the Performer will fall back on the last working DMX signal, which will
, press the ENTER button to open the menu.
1-channel mode
2-channel mode
5-channel mode
, press the ENTER button to open the menu.
to deactivate/activate the
.
18