Table of Contents
Advertisement
Creator 1024 PRO
It is fairly easy to accidentally leave Fan mode turned on and be very confused about why the wheels
are not working properly, so turn it off as soon as you have completed the effect.
9. Advanced Options
Locate positions selected fixtures at central position with light coming out of them. The settings are
not placed in the programmer, so you need to change the values if you want to save them. The
"locate fixture" settings for each type of fixture are defined in the personality file.
De-Select fixtures deselects all fixtures but does not clear the programmer.
Close Fixture: Select a fixture, press <Close Fixture>, then, all the channels except the pan/tilt
channels of the fixture will output 0.
If you use the firmware version 2.3.10., press <Close Fixture> to temporarily and rapidly remove the built-in
shapes from the selected fixtures. Press <Clear> to recover.
Ordercode: 50731
17
Hide quick links:
Advertisement
Table of Contents
