Personality Management; Delete Personality; Delete All Personality; Update Personality - SHOWTEC Creator 1024 pro Manual

Creator 1024 PRO

4. Personality Management

Delete Personality

A maximum of 50 personalities can be saved on the console. To add a new personality when there are
already 50 personalities on it, delete one of the old personalities first.
01) Enter Delete Personality menu.
02) Press <Up> or <Down> to browse.
03) Select the desired personality.
04) Press <Enter> to delete.

Delete All Personality

All personalities will be deleted from the console.

Update Personality

01) Insert a correct USB memory stick.
02) Press <Setup>.
03) Press <D>, to start reading personality libraries.
04) Select the desired personality to add.
05) Once updated, the line will be highlighted.

Edit Personality

01) Press <D> [Edit Personality].
02) Turn the Wheel V to modify the characters. Press <Up and <Down> to move the cursor. Press
<Delete> to delete character.
03) After naming the file, press <Enter> to enter Channels Number menu.
04) Turn the Wheel V to modify the channel naumber or press a fixture button to enter the channel
number. Press <Enter> to enter Channel Edit Menu.
05) Select the desired channel which should be edited. Once selected, the option will be highlighted.
Press an attribute button to assign the desired attribute to the channel. If it is not a fine-tone channel,
press the option button again to enter Advanced Channel Setting Menu.
06) In Advanced Channel Setting Menu, turn the Wheel B to modify the characters. Press <Up> and
<Down> to move the cursor. Press <Delete> to delete a character. Press <B> to change the attribute
type. Press <C> to change the channel type. Turn the Wheel V to change the locating value of the
channel. Press <D> to edit the reverse status of the channel.
07) When finished, press <Exit> to return to the previous menu.
08) Repeat step 5 until you have edited all the channels. Press <Enter> to enter Macro menu.
09) In Macro menu, select the macro which should be edited. Turn the Wheel B or press a fixture button
to enter a channel number. Turn the Wheel V to enter a function value. After editing the macro
command, press <Enter> to save the created/edited personality.

5. Show Record

Please, see page 34.

6. User Settings

01) Press <Up> or <Down> to turn the pages.
02) Choose one of the following options:
 MIDI (Disable/Master/Slave): If set to Disable, the Creator will not respond to MIDI signals. If set to
Master, the Creator will send MIDI signals to other devices. If set to Slave, the Creator will only
receive MIDI signals and the playback section will respond only to MIDI signals.
 MIDI Channel (1-16): Set the number of MIDI channels.
 Palette LTP (Close/Open): Link To Playback. This option is useful if you have assigned any color to
one of the palettes and then used this palette to program a show. If set to Open and you have
reassigned another color to the same palette, the color will automatically be used in the
previously saved show, without the need of adjusting the show itself.
NOTE: In [Edit Time] menu, [Relate palette] option must be selected.
 Save Pal.: Choose between Not Link Attribute and Link Attribute. While saving a palette, you can
select to link it to an attribute or not. If you have chosen Link Attribute, only the data in the
Ordercode: 50731
36