Related Manuals for SHOWTEC Phantom 100 Spot
Summary of Contents for SHOWTEC Phantom 100 Spot
- Page 1 MANUAL ENGLISH Phantom 100 Spot Order code: 40077 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Phantom 100 Spot Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Features ..................................7 Front .................................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Phantom 100 Spot ● Pro power cable (1,3 m) ●... - Page 4 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Phantom 100 Spot ● This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. ● Repairs, servicing and electric connection must be carried out by a qualified technician. ● WARRANTY: Till one year after date of purchase. -
Page 6: Connection With The Mains
Phantom 100 Spot The Phantom can be placed on a flat stage floor or mounted to any kind of truss with quick locks and a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. -
Page 7: Return Procedure
Phantom 100 Spot Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
Phantom 100 Spot Description of the device Features The Phantom 100 Spot is a moving head with high output and great effects. ● Input voltage: 100–240 V AC, 50/60 Hz ● Power consumption: 360 W ● Light source: 1 x 100 W White LED ●... -
Page 9: Back
08) 3-pin DMX signal connector OUT Installation Remove all packing materials from the Phantom 100 Spot. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 10: Control Modes
Phantom 100 Spot Control Modes There are 5 modes: ● Stand-alone (Auto) ● Manual ● Sound-controlled ● Master/Slave ● DMX-512 (10CH, 14CH) One Phantom (Auto, Manual) 01) Fasten the effect light to a firm trussing. Leave at least 0,8 meter on all sides for air circulation. -
Page 11: Multiple Phantoms (Dmx Control)
Phantom 100 Spot Multiple Phantoms (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,8 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin XLR cable to connect the Phantoms and other devices. -
Page 12: Fixture Linking
Phantom 100 Spot Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 13: Control Panel
Phantom 100 Spot The Phantom 100 Spot can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) LCD display UP button C) ENTER button D) DOWN button MENU button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. -
Page 14: Menu Overview
Phantom 100 Spot Menu Overview Order code: 40077... -
Page 15: Main Menu Options
Phantom 100 Spot Main Menu Options DMX Addressing DMX mode / Master-Slave / Auto / Sound-controlled / Manual Pan and Tilt Reverse / Screen Reverse / Pan and Tilt Angle / Sound Sensitivity / Wireless Enable / Wireless Unlink / Reset / Factory Reset System Information Upon start-up, the device will show its currently active mode, as well as the current Pan/Tilt settings. -
Page 16: Built-In Programs Mode
Phantom 100 Spot Built-in Programs Mode You can run the auto programs when using the Phantom. 01) While in the main menu, press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to select one of the 5 modes: 1. -
Page 17: Manual Mode
Phantom 100 Spot 5. Manual Mode 01) Press the UP/DOWN buttons until the display shows MANUAL. 02) Press the ENTER button to activate Manual mode. 03) The display will show: 04) Press the UP/DOWN buttons to choose one of the following options: ●... -
Page 18: Advanced Settings
Phantom 100 Spot Advanced Settings 01) While in the main menu, press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. 03) The display will show: 04) Press the UP/DOWN buttons to toggle through the following options: ●... -
Page 19: Dmx Channels
Phantom 100 Spot DMX Channels 10 Channels Channel 1 – Horizontal movement (Pan) Move the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0–255, 128-center). The head can be turned by 540° and stopped at any position you wish. - Page 20 Phantom 100 Spot Channel 6 – Rotating Gobo wheel + Gobo Shake Open/White 8-15 Gobo 1 (Glass) 16-23 Gobo 2 (Metal) 24-31 Gobo 3 (Metal) 32-39 Gobo 4 (Metal) 40-47 Gobo 5 (Metal) 48-55 Gobo 6 (Metal) 56-63 Gobo 7 (Metal)
-
Page 21: Channels
Phantom 100 Spot 200-215 Sound-controlled Program 5 216-231 Sound-controlled Program 6 232-247 Sound-controlled Program 7 248-255 Sound-controlled Program 8 14 Channels Channel 1 – Horizontal movement (Pan) Move the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0–255, 128-center). - Page 22 Phantom 100 Spot 149-161 Gradual split color Light Green/Light Blue 162-175 Gradual split color Light Blue/Dark Blue 176-189 Gradual split color Dark Blue/White 190-221 Continuous clockwise rotation (CW) rainbow effect, from fast to slow 222-223 Stop 224-255 Continuous counterclockwise rotation (CCW) rainbow effect, from slow to fast Channel 9 –...
- Page 23 Phantom 100 Spot Channel 13 – Channel Functions Not functional 8-15 Blackout during Pan/Tilt movement 16-23 Blackout during color wheel movement 24-31 Blackout during gobo wheel movement 32-39 Blackout during Pan/Tilt/color wheel movement 40-47 Blackout during Pan/Tilt/gobo wheel movement 48-55...
-
Page 24: Maintenance
04) The electric power supply cables must not show any damages or material fatigue. The Phantom 100 Spot requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. -
Page 25: Glass Gobo Orientation
Phantom 100 Spot Fig. 07 Fig. 08 03) Remove the lamp cover by unscrewing the 4 screws (see fig. 07) and the 4 lens screws (see fig. 08). 04) Gently tilt the head so that the small metal housing can slide out more easily. -
Page 26: Rotating Gobo Wheel Color Wheel
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Phantom to your Showtec dealer. 03) The fuse. Replace the fuse. See page 23 for replacing the fuse. - Page 27 Phantom 100 Spot Problem Probable cause(s) Remedy One or more No power to the fixture. ● Check if power is switched on and fixtures do not cables are plugged in. function at all Primary fuse blown. ● Replace fuse. Fixtures reset The controller is not connected.
-
Page 28: Product Specifications
Phantom 100 Spot Product Specifications Model: Showtec Phantom 100 Spot Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 360 W DMX linking: 30 pcs Fuse: F5AL/250V Dimensions: 325 x 210 x 420 mm (LxWxH) Weight: 11,3 kg Operating and Programming:... -
Page 29: Dimensions
Phantom 100 Spot Dimensions Order code: 40077... -
Page 30: Notes
Phantom 100 Spot Notes Order code: 40077... - Page 31 Phantom 100 Spot Order code: 40077...
- Page 32 ©2019 Showtec...