Related Manuals for SHOWTEC Performer 1500 Fresnel Q6
Summary of Contents for SHOWTEC Performer 1500 Fresnel Q6
- Page 1 USER MANUAL ENGLISH Performer 1500 Fresnel Q6 Product code: 33130 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Performer 1500 Fresnel Q6 Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Performer 1500 Fresnel Q6 Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................4 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................5 Safety .................................. - Page 4 Performer 1500 Fresnel Q6 Settings ................................29 Upload ..............................29 Reset ..............................29 Dimmer ..............................30 DMX Error ..............................30 PWM Rate ............................30 Power CCT ............................30 Performance ............................30 Mode Setting ............................31 XY Offset ...............................31 UC ................................31 Disp Key (Display Lock) .........................31 Disp Time (Display Time) ........................31 CCT (Correlated Color Temperature Control) ..................32...
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Performer 1500 Fresnel Q6 ● Schuko to True1 pro power cable (1,4 m) ● 1 x safety cable ●... -
Page 6: Symbols And Signal Words
Performer 1500 Fresnel Q6 ● References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. Safety”, “turn the adjustment screw (02)” ● 0–255: Defines a range of values ● Notes: Note: (in bold lettering) is followed by useful information or tips Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. -
Page 7: Safety
Performer 1500 Fresnel Q6 Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions... - Page 8 Performer 1500 Fresnel Q6 WARNING Risk of burns due to hot surface The surface and the inner parts of the device can become very hot during operation. ● Do not touch the device during operation. ● Allow the device to cool down for at least 15 minutes before handling.
-
Page 9: Requirements For The User
Performer 1500 Fresnel Q6 ● If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged by the formed condensation. -
Page 10: Description Of The Device
Performer 1500 Fresnel Q6 Description of the Device The Performer 1500 Fresnel Q6 is equipped with a 6-color LED engine. This engine is customized with specially selected colors with specified wavelengths, ensuring a high CRI and even beam. It contains 16 color presets which are frequently used in theaters. -
Page 11: Back View
Performer 1500 Fresnel Q6 Back View Fig. 03 Safety eye Pro True1 power connector OUT Fuse F2AL/250 V 5-pin DMX connector IN 5-pin DMX connector OUT Pro True1 power connector IN Product code: 33130... -
Page 12: Product Specifications
Performer 1500 Fresnel Q6 Product Specifications Model: Performer 1500 Fresnel Q6 Electrical: Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 120 W Max. power: 100 W Power factor: Fuse: F2AL/250 V Physical: Dimensions: 450 x 322 x 370 mm (LxWxH) -
Page 13: Optional Accessories
Performer 1500 Fresnel Q6 Optional Accessories The Performer 1500 Fresnel Q6 is delivered without accessories. You can additionally purchase the following accessories: Product code: 33160 (Barndoor for Performer 1500 Fresnel) Dimensions Fig. 04 Fig. 05 Product code: 33130... -
Page 14: Installation
Performer 1500 Fresnel Q6 Fig. 06 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. - Page 15 Performer 1500 Fresnel Q6 To mount the device, follow the steps below: 01) Use a clamp to attach the device to the supporting structure, as shown in Fig. 07. Make sure that the device cannot move freely. Optionally, you can use the Slide Complete to attach the device.
-
Page 16: Angle Adjustment
Performer 1500 Fresnel Q6 Angle Adjustment You can adjust the angle of the device with the 2 adjustment screws (03). 01) Turn the adjustment screws (03) counterclockwise to release them. 02) Tilt the device to the desired angle (see Fig. 08). -
Page 17: Barndoor Installation
Performer 1500 Fresnel Q6 Barndoor Installation The barndoor holder is equipped with a spring-loaded retaining clip. This prevents the barndoor from falling out. Release the retaining clip by pressing the lock towards the lens and pressing on the longer side of the screw. -
Page 18: Connecting To Power Supply
Do not link more devices on one power link than the maximum recommended number. Maximum recommended number of devices: ● at 100–120 V: 14 devices Performer 1500 Fresnel Q6 ● at 200–240 V: 28 devices Performer 1500 Fresnel Q6 Product code: 33130... -
Page 19: Setup
Performer 1500 Fresnel Q6 Setup Warnings and Precautions Attention Connect all data cables before supplying power. Disconnect power supply before connecting or disconnecting data cables. Stand-alone Setup When the Performer 1500 Fresnel Tungsten is not connected to a controller or to other devices, it functions as a stand-alone device. -
Page 20: Dmx Cables
Fig. 12. Fig. 12 Master/Slave Setup The Performer 1500 Fresnel Q6 supports master/slave control mode. To connect multiple devices in master/slave setup, follow the steps below: Connect the first device’s DMX OUT connector to the second device’s DMX IN connector. -
Page 21: Dmx Linking
In a setup with multiple devices, make sure that you set the DMX starting address of each device correctly. The Performer 1500 Fresnel Q6 has 7 personalities: 3 channels, 6 channels, 7 channels, 9 channels, 10 channels, 13 channels and 20 channels. -
Page 22: Operation
Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device. Control Modes The Performer 1500 Fresnel Q6 supports the following control modes: ● Stand-alone: Knob mode, Static, Color presets, Auto ●... -
Page 23: Control Panel
Use the rotatable controls to adjust settings in Knob mode. See 6.6.1. Knob Mode on page 25 for more information. Start-up Upon start-up the display will show a splash screen with the logo of Showtec. Press any button to enter the password and/or enter the Main Menu. Note: ●... -
Page 24: Menu Overview
Performer 1500 Fresnel Q6 Menu Overview Product code: 33130... - Page 25 Performer 1500 Fresnel Q6 Product code: 33130...
-
Page 26: Main Menu Options
Performer 1500 Fresnel Q6 Main Menu Options The main menu has the following options: Press the UP/DOWN buttons to navigate through the main menu. 02) Press the ENTER button to open the submenus. Note: Some of the submenus require a password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN, ENTER. -
Page 27: Mode 2
Performer 1500 Fresnel Q6 Mode 2 In this menu you can set the dimmer and the color presets (Lee and Rosco colors). Turn the controls (D/E) to adjust settings. The adjustment ranges are: ● D: Dimmer, from dark to brightest (0–100 %) ●... -
Page 28: Personality (Dmx Channel Modes)
Performer 1500 Fresnel Q6 Personality (DMX Channel Modes) In this menu you can set the DMX channel mode (personality). 01) Press the UP/DOWN buttons to select the desired DMX channel mode. There are 7 options available: BASIC: 3 channels TOUR:... -
Page 29: Edit
Performer 1500 Fresnel Q6 Edit In this menu you can edit the custom programs thus creating your own custom show. Press the UP/DOWN buttons to choose the custom program you want to edit (PROGRAM01–10). Press the ENTER button to confirm the selection. Each custom program has 30 scenes, which can be edited: Press the UP/DOWN buttons to select the desired scene. -
Page 30: Settings
Performer 1500 Fresnel Q6 Settings In this menu you can adjust the device’s settings. This menu requires the password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN. Enter the password to access the menu. -
Page 31: Dimmer
Performer 1500 Fresnel Q6 Dimmer In this submenu you can adjust the dimmer speed. Select DIMMER and press the ENTER button to open the submenu. Press the UP/DOWN buttons to choose one of the following options: ● DIM 1, DIM 2, DIM 3, DIM 4: non-linear dimmers, from fast to slow ●... -
Page 32: Mode Setting
Performer 1500 Fresnel Q6 Mode Setting In this submenu you can set the device to perform as a master. Select MODE SETTINGS and press the ENTER button to open the submenu. Press the UP/DOWN buttons to toggle between the following 2 options: ●... -
Page 33: Cct (Correlated Color Temperature Control)
Performer 1500 Fresnel Q6 CCT (Correlated Color Temperature Control) In this menu you can calibrate the color temperature. This menu requires the password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN. Enter the password to access the menu. -
Page 34: Rdm
Performer 1500 Fresnel Q6 In this submenu you can view the RDM details of the device. Press the UP/DOWN buttons to choose between the following options: ● UID: the display shows the unique identification number of the device ● LABEL: the display shows the name of the device Press the ENTER button to confirm the selection. - Page 35 Performer 1500 Fresnel Q6 3 CH 6 CH 9 CH 13 CH 20 CH Function Value Setting (Basic) (CLR) (SSP) (TOUR) (TR16) 212–215 3200 K 216–219 3500 K 220–223 4000 K 224–227 4200 K 228–231 4500 K 232–235 5600 K 236–239...
-
Page 36: Channels
Performer 1500 Fresnel Q6 7 Channels 7 CH Function Value Setting (HSIC) Intensity 000–255 From low to high intensity (0–100 %) 000–255 From low to high intensity (0–100 %) Hue Fine 000–255 From low to high intensity (0–100 %) Saturation 000–255... -
Page 37: Channels
Performer 1500 Fresnel Q6 10 Channels 10 CH Function Value Setting (CMY) Master Dimmer 000–255 From low to high intensity (0–100 %) Cyan 000–255 From low to high intensity (0–100 %) Magenta 000–255 From low to high intensity (0–100 %) Yellow 000–255... - Page 38 Performer 1500 Fresnel Q6 10 CH Function Value Setting (CMY) 081–090 Auto 5 091–100 Auto 6 101–110 Auto 7 111–120 Auto 8 121–130 Auto 9 131–140 Auto 10 141–150 Custom program 1 Use CH 2 to set Time. Use CH 3 to set Fade.
-
Page 39: Supported Rdm Pids (Parameter Ids)
Performer 1500 Fresnel Q6 Supported RDM PIDs (Parameter IDs) Parameter ID Discovery command SET command GET command DISC_UNIQUE_BRANCH DISC_MUTE DISC_UN_MUTE DEVICE_INFO SUPPORTED_PARAMETERS SOFTWARE_VERSION_LABEL DMX_START_ADDRESS IDENTIFY_DEVICE DEVICE_MODEL_DESCRIPTION MANUFACTURER_LABEL DEVICE_LABEL SENSOR_DEFINITION SENSOR_VALUE DEVICE_RESET DMX_PERSONALITY DMX_PERSONALITY_DESCRIPTION STATUS_MESSAGES STATUS_ID_DESCRIPTION Product code: 33130... -
Page 40: Troubleshooting
Performer 1500 Fresnel Q6 Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 41: Maintenance
Performer 1500 Fresnel Q6 Maintenance Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. WARNING Risk of burns due to hot surface Allow the device to cool down for at least 15 minutes before servicing or cleaning. -
Page 42: Basic Cleaning Instructions
Performer 1500 Fresnel Q6 Basic Cleaning Instructions The external lens of the device must be cleaned periodically in order to optimize the light output. The cleaning schedule depends on the conditions at the site where the device is installed. When smoke or fog machines are used at the site, the device will need more frequent cleaning. -
Page 43: Deinstallation, Transportation And Storage
Performer 1500 Fresnel Q6 Deinstallation, Transportation and Storage Instructions for Deinstallation WARNING Incorrect deinstallation can cause serious injuries and damage of property. ● Let the device cool down before dismounting. ● Disconnect power supply before deinstallation. ● Always observe the national and site-specific regulations during deinstallation and derigging of the device. - Page 44 ©2020 Showtec...