Related Manuals for SHOWTEC Powerbeam 10 LED
Summary of Contents for SHOWTEC Powerbeam 10 LED
- Page 1 Powerbeam 10 LED ORDERCODE 40142 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700...
- Page 2 For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
-
Page 3: Table Of Contents
Overview ..................................7 Installation ..................................8 Set Up and Operation ..............................8 Control Modes ................................8 One Powerbeam 10 LED (Static Colors) ......................8 Multiple Powerbeam 10 LEDs (DMX Control) ....................8 Fixture Linking ................................10 Data Cabling ................................10 Control Panel ................................ -
Page 4: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Powerbeam 10 LED • IEC cable 0,90m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time. - Page 5 For replacement use fuses of same type and rating only. The user is responsible for correct positioning and operating of the Powerbeam 10 LED. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
-
Page 6: Operating Determinations
Always let the installation be carried out by an authorized dealer ! Procedure: If the Powerbeam 10 LED is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Powerbeam 10 LED, with the mounting-bracket, to the trussing system. -
Page 7: Return Procedure
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER FASE BLUE BLACK SILVER YELLOW/GREEN GREEN GREEN... -
Page 8: Description Of The Device
Description of the device Features The Showtec Powerbeam 10 LED is a light effect with high output and great effects. Lightweight and robust High light output Road proof design No fans, low noise Ideal tool for entertainment applications of any size ... -
Page 9: Installation
2. Plug the end of the electric mains power cord into a proper electric power supply socket. 3. When the Powerbeam 10 LED is not connected by a DMX-cable, it functions as a stand-alone device. Please see page 13 for more information about the static colors. - Page 10 Supply electric power: Plug electric mains power cords into each unit’s IEC socket, then plug the other end of the mains power cord into a proper electric power supply, starting with the first unit. Do not supply power before the whole system is set up and powered properly. Multiple Powerbeam 10 LEDs Pro Set Up Max.
-
Page 11: Fixture Linking
The Powerbeam 10 LED uses a maximum of 10 channels. Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the EIA-485 standard no more than 30 devices should be connected on one data link. -
Page 12: Control Panel
When using multiple Powerbeam 10 LEDs, make sure you set the DMX addresses right. Therefore, the DMX address of the first Powerbeam 10 LED should be 1(001); the DMX address of the second Powerbeam 10 LED should be 1+4=5; the DMX address of the third Powerbeam 10 LED should be 5+4=9, etc. -
Page 13: Menu Overview
Menu Overview... -
Page 14: Main Menu Options
Main Menu Options 1. Manual 2. Display 3. Temperature 4. Reset 5. Default 6. DMX address 1. Manual Menu (static colors) 1) Select the manual menu using the mode esc (B) button and push the enter (E) button. 2) Use the up (C)/down (D) buttons to select the dim menu and push the enter (E) button. 3) Use the up (C)/down (D) buttons to set up the desired light intensity. -
Page 15: Reverse Display Menu
2. Reverse Display Menu 1) Select the display menu using the mode esc (B) button and push the enter (E) button. 2) Use the up (C)/down (D) buttons to select either diS (normal display) or rdiS (reverse display) and push the enter (E) button. -
Page 16: Service Functions
Service Functions 1) Push and hold the mode esc (B) button for 10 seconds. The display below will appear allowing you to enter the password (2323). Select a digit by pushing the down (D) button. The active digit will start blinking. Use the up (C) button to change the value for the selected digit. -
Page 17: Dmx Channels
DMX Channels Channel 1 – Dimmer 0-255 0-100% Channel 2 - Programs White 8-15 Dark blue 16-23 Yellow 24-31 Pink 32-39 Green 40-47 48-55 Light blue 56-63 Orange 64-71 White + Dark blue 72-79 Dark blue + Yellow 80-87 Yellow + Pink 88-95 Pink + Green 96-103... -
Page 18: Maintenance
4. If all of the above appears to be O.K., plug the unit in again. 5. If you are unable to determine the cause of the problem, do not open the Powerbeam 10 LED, as this may damage the unit and the warranty will become void. -
Page 19: No Response To Dmx
No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 1. Check the DMX setting. Make sure that DMX addresses are correct. 2. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again. -
Page 20: Product Specification
Product Specification Model: Showtec Powerbeam 10 LED Lightweight and robust High light output Road proof design No fans, low noise Ideal tool for entertainment applications of any size Creates a pin spot effect due to its narrow beam angle.