Save Dmx/Blackout; Settings Lock; Dmx Channel Modes; Reset Settings - SHOWTEC Performer 2000 Fresnel DDT MKII V1 Manual

Performer 2000 Fresnel DDT MKII

5.7. Save DMX/Blackout

01) When the display shows
02) Press the UP/DOWN buttons to toggle between the 2 options:
03) If the display shows
04) If the display shows
ensure undisrupted performance.

5.8. Settings lock

01) When the display shows
02) Press the UP/DOWN buttons to toggle between
03) When the display shows ON, you will need to insert the password (press UP, DOWN, UP, DOWN, ENTER)
to enter Settings menu.

5.9. DMX channel modes

01) When the display shows
02) Press the UP/DOWN buttons to toggle between the 3 channel modes:

5.10. Reset settings

01) When the display shows
.
02) Insert the safety key combination by pressing the buttons in the following order: UP, DOWN, UP,
DOWN, ENTER.
03) The display will promptly show

6. Motor reset

01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the UP/DOWN buttons to choose between Yes and No.
03) If the display shows
04) The device will now perform the motor reset.
Ordercode: 33037
, press the ENTER button to open the menu.
Blackout
DMX data save
, the Performer will blackout the output, in case of the DMX signal error.
, the Performer will fall back on the last working DMX signal, which will
, press the ENTER button to open the menu.
, press the ENTER button to open the menu.
1-channel mode
2-channel mode
5-channel mode
, press the ENTER button to enter the menu. The display will show
and the settings will have been reset.
, press the ENTER button.
.
22
.