LED Octostrip Set MKII 100 cm
How To Make a Data Cable
A standard ETHERNET cable can be used to replace the data cable required to transmit the data for the
LED Octostrip MKII 100 cm.
Please follow the instructions below in order to create an extra net cable.
Take a standard net cable (CAT-5/ 5E /6) and connect it to the RJ45 connector, as shown in the picture
below (fig. 07). The wires should now be colored as follows:
Fig. 07
Software for controlling
In combination with Arkaos or DMT Software, you are able to play videos over the LED Octostrip MKII.
You only have to connect all the Octostrips and run your software.
102101
Arkaos Media Master Express 5.0
The latest update of the successful media server software.
102201
Arkaos Media Master Pro 5.0
PRO DMX video software for lighting designers.
Ordercode: 42232
14