Record A Chase Step; Add A Chase Step To An Existing Chase - SHOWTEC ColorCue 1 AIR User Manual

Table of Contents

Advertisement

ColorCue 1 AIR

Record a Chase Step

To record a chase step:
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER CHASES button (16) to enter User Chase mode. The LED on the button lights up.
Press one of the COLORS/CHASES buttons (1)–(12) to which you want to assign the chase. The LED on
the button lights up.
Note:
Press a COLORS/CHASES button (1)–(12) to make sure that the button is free. If the LED on the button lights
up, the button is not free.
You can adjust the color in one of the 3 ways:
Manual setup:
Preset color:
User color:
Press the RECORD button (21) to save the setting. The LEDs on all buttons blink 3 times.
Program all steps in a chase. One chase can have up to 99 steps.
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button turns off.
Note:
It is not possible to record strobe, speed, fade or direction in a chase. Adjust these functions during the
playback of a chase.

Add a Chase Step to an Existing Chase

To add a chase step to a chase:
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER CHASES button (16) to enter User Chase mode. The LED on the button lights up.
Press the COLORS/CHASES button (1)–(12) for which you want to edit the chase. The LED on the
button lights up.
Press the STEP+ (19) or the STEP- (20) button to select the step after which you want to add another
step.
Set the color in one of the following 3 ways:
Manual setup: See 6.3.1. Manual Mode on page 19 to set the color manually.
Preset color:
User color:
Press the RECORD button (21) to save the setting. The LEDs on all buttons blink 3 times.
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button turns off.
Product code: 50707
See 6.3.1. Manual Mode on page 19 to set up the color manually
See 6.3.2.1. Preset Colors Mode on page 19 to select one of the 12 preset colors
See 6.3.2.2. User Colors Mode on page 20 to select one of the user-recorded colors
See 6.3.2.1. Preset Colors Mode on page 19 to select one of the 12 preset colors.
See 6.3.2.2. User Colors Mode on page 20 to select one of the user-recorded
colors.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

50707

Table of Contents