Alcatel-Lucent 7450 Configuration Manual page 518

General Filter Entry Commands
log
Syntax
log log-id
no log
Context config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
config>filter>mac-filter>entry
Description
This command creates the context to enable filter logging for a filter entry and specifies the
destination filter log ID.
The filter log ID must exist before a filter entry can be enabled to use the filter log ID.
The no form of the command disables logging for the filter entry.
Default no log
Parameters log-id — The filter log ID destination expressed as a decimal integer.
Page 518
Values 101 — 199
7450 ESS Router Configuration Guide