12.200.1.1
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp mac 00:00:5a:40:00:01
===============================================================================
ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
===============================================================================
A:ALA-A#
static-route
Syntax
static-route [family] [[ip-prefix /mask] | [preference preference] | [next-hop ip-address] | tag
tag]
Context
show>router
Description
This command displays the static entries in the routing table. If no options are present, all static routes
are displayed sorted by prefix.
Parameters
family — Specify the type of routing information to be distributed by this peer group.
ip-prefix /mask — Displays static routes only matching the specified ip-prefix and mask.
preference preference — Only displays static routes with the specified route preference.
next-hop ip-address — Only displays static routes with the specified next hop IP address.
7450 ESS Router Configuration Guide
00:00:5a:01:00:33 00:00:00 Inv
MAC Address
00:00:5a:40:00:01 00:00:00 Sta to-ser1
MAC Address
00:00:5a:40:00:01 00:00:00 Sta to-ser1
Values
ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
Values
ipv4-prefix:
ipv4-prefix-length: 0 — 32
Values
0 — 65535
Values
ipv4-address:
to-ser1
Age
Type Interface
Age
Type Interface
a.b.c.d (host bits must be 0)
a.b.c.d (host bits must be 0)
IP Router Configuration
Page 285