Alcatel-Lucent 7450 Configuration Manual page 636

Global Commands
cache-size
Syntax cache-size num-entries
no cache-size
Context config>cflowd
Description
This command specifies the maximum number of active flows to maintain in the flow cache table.
The no form of this command resets the number of active entries back to the default value.
Default 65536 (64K)
Parameters num-entries — The number of entries maintained in the cflowd cache.
collector
Syntax collector ip-address[:port] {version [ 5 | 8 | 9 | 10]}
no collector
Context config>cflowd
Description This command defines a flow data collector for cflowd data. The IP address of the flow collector
must be specified. The UDP port number is an optional parameter. If it is not set, the default of 2055
is used for all collector versions. To connect to a IPFIX (version 10) collector using the IPFIX default
port, specify port 4739 when configuring the collector. The version must be specified. A maximum of
5 collectors can be configured.
The no form of this command removes the flow collector definition from the config and stops the
export of data to the collector. The collector needs to be shutdown to be deleted.
Default none
Parameters ip-address — Specifies the address of a remote Cflowd collector host to receive the exported Cflowd
port — Specifies the UDP port number on the remote Cflowd collector host to receive the exported
Page 636
Values 1000 - 1000000 (SF/CPM5)
1000 - 250000
1000 - 128k
data.
Values <ip-address[:port]> : ip-address - a.b.c.d[:port]
Cflowd data.
Values
1— 65535
Default 2055
(SF/CPM3)
(all other platforms)
x:x:x:x:x:x:x:x (IPv6)
[x:x:x:x:x:x:x:x]:port (IPv6)
x - [0..FFFF]H
7450 ESS Router Configuration Guide
(IPv4)