Alcatel-Lucent 7450 Configuration Manual page 542

MAC Filter Match Criteria
dsap
Syntax dsap dsap-value [mask]
no dsap
Context config>filter>mac-filter>entry>match
Description
Configures an Ethernet 802.2 LLC DSAP value or range for a MAC filter match criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria.
Use the no form of the command to remove the dsap value as the match criterion.
Default no dsap
Parameters dsap-value — The 8-bit dsap match criteria value in hexadecimal.
mask — This is optional and may be used when specifying a range of dsap values to use as the match
0x00 — 0xFF
dst-mac
Syntax dst-mac ieee-address [mask]
no dst-mac
Context config>filter>mac-filter>entry
Description Configures a destination MAC address or range to be used as a MAC filter match criterion.
The no form of the command removes the destination mac address as the match criterion.
Default
no dst-mac
Page 542
Values 0x00 — 0xFF (hex)
criteria.
This 8 bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
Default FF (hex) (exact match)
Format Syntax
DDD
0xHH
0bBBBBBBBB
7450 ESS Router Configuration Guide
Example
240
0xF0
0b11110000