Alcatel-Lucent 7450 Configuration Manual page 104

Command Hierarchies
For router interface VRRP commands, see
Page 104
— no qos
— [no] remote-proxy-arp
— secondary {[ip-addr/mask | ip-addr][netmask]} [broadcast {all-ones | host-
ones}] [igp-inhibit]
— no secondary
— [no] shutdown
— static-arp ip-addr ieee-mac-addr unnumbered
— no static-arp unnumbered
— [no] strip-label
— tcp-mss mss-value
— no tcp-mss
— tos-marking-state
— no tos-marking-state
— unnumbered
— no unnumbered
— [no] urpf-check
— mode
— no mode
— [no] mh-primary-interface
— address {ip-address/mask | ip-address netmask}
— no address
— description description-string
— no description
— [no] shutdown
— [no] mh-secondary-interface
— hold-time holdover-time
— no hold-time
— address {ip-address/mask | ip-address netmask}
— no address
— description description-string
— no description
— [no] shutdown
— route-next-hop-policy
— [no] template
— include-group
— no include-group
— [no]
— [no]
— protection-type
— no protection-type
— nh-type
— no nh-type
[ip-addr/mask | ip-addr][netmask ]
{trusted | untrusted}
[ip-addr | ip-int-name]
{strict|loose|strict-no-ecmp}
template-name
group-name [pref pref]
group-name
exclude-group group-name
srlg-enable
{link | node}
{ip | tunnel}
VRRP Command Reference on page
7450 ESS Router Configuration Guide
379.