Alcatel-Lucent 7450 Configuration Manual page 517

The no form of the command detaches this filter from the system filter.
Default no chain-to-system-filter
Operational note:
If no system filter is currently active, the command has no effect.
ip
Syntax ip filter-id
no ip filter-id
Context config>filter>system-filter
Description This command activates an IPv4 system filter policy. Once activated, all IP ACL filter policies that
chain to the system filter (config filter ip-filter chain-to-system-filter) will automatically execute
system filter policy rules first.
The no form of the command deactivates the system filter policy.
Default None of the IPv4 system filters is available by default.
Parameters filter-id — An existing IP filter policy with scope system.
ipv6
Syntax ipv6 filter-id
no ipv6 filter-id
Context config>filter>system-filter
Description
This command activates an IPv6 system filter policy. Once activated, all IPv6 ACL filter policies that
chain to the system filter (config filter ipv6-filter chain-to-system-filter) will automatically execute
system filter policy rules first.
The no form of the command deactivates the system filter policy.
Default None of the IPv6 system filters is available by default.
Parameters filter-id — An existing IPv6 filter policy with scope system.
7450 ESS Router Configuration Guide
Values [1..65535] | <filter-name:64 char max>
Values [1..65535] | <filter-name:64 char max>
Filter Policies
Page 517