Configuring Cflowd
Use the CLI syntax displayed below to perform the following tasks:
•
•
•
•
CLI Syntax: config>cflowd#
7450 ESS Router Configuration Guide
Enabling Cflowd on page 612
Configuring Global Cflowd Parameters on page 613
Configuring Cflowd Collectors on page 614
Enabling Cflowd on Interfaces and Filters on page 626
active-timeout minutes
cache-size num-entries
inactive-timeout seconds
template-retransmit seconds
overflow percent
rate sample-rate
collector ip-address[:port] {version [5 | 8 | 9 |10]}
aggregation
as-matrix
destination-prefix
protocol-port
raw
source-destination-prefix
source-prefix
template-set {basic | mpls-ip}
autonomous-system-type [origin | peer]
description description-string
no shutdown
no shutdown
Configuring System Management with CLI
Page 611