Configuring An Ip Router With Cli - Alcatel-Lucent 7450 Configuration Manual

Configuring an IP Router with CLI

This section provides information to configure an IP router.
Topics in this section include:
•
•
•
•
7450 ESS Router Configuration Guide
Router Configuration Overview on page 76
Basic Configuration on page 77
Common Configuration Tasks on page 78
→
Configuring a System Name on page 78
→
Configuring Interfaces on page 79
• Configuring a System Interface on page 79
• Configuring a Network Interface on page 79
• Configuring Proxy ARP on page 84
• Creating an IP Address Range on page 87
→
Configuring an Autonomous System on page 90
→
Configuring Overload State on a Single SFM on page 91
→
Service Management Tasks on page 92
Service Management Tasks on page 92
→
Changing the System Name on page 92
→
Modifying Interface Parameters on page 93
→
Deleting a Logical IP Interface on page 94
IP Router Configuration
Page 75