Alcatel-Lucent 7450 Configuration Manual page 586

Show Commands
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default Clears all counters associated with the MAC filter policy entries
Parameters mac-filter-id — The MAC filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
Page 586
Values 1 — 65535
cleared.
Values
1 — 65535
7450 ESS Router Configuration Guide