Alcatel-Lucent 7450 Configuration Manual page 157

Parameters
local-user-db-name — Specifies the local user database name.
session-assign-method
Syntax session-assign-method weighted
no session-assign-method
Context config>router>l2tp>group
Description This command specifies how new sessions are assigned to one of the set of suitable tunnels that are
available or could be made available.
Default
no session-assign-method
Parameters weighted — specifies that the sessions are shared between the available tunnels. If necessary, new
session-limit
Syntax session-limit session-limit
no session-limit
Context config>router>l2tp>group
config>router>l2tp>group>tunnel
Description
This command configures the session limit. The value controls how many L2TP session will be
allowed within a given context (system, group, tunnel).
The no form of the command removes the value from the configuration.
Default no session-limit
Parameters session-limit — Specifies the allowed number of sessions within the given context.
7450 ESS Router Configuration Guide
Values 32 chars max
tunnels are set up until the maximum number is reached. The distribution aims at an equal ratio
of the actual number of sessions to the maximum number of sessions.
Default no session-assign-method. All new sessions are placed by preference in existing
tunnels.
Values weighted — Enables weighted preference to tunnels in the group.
Values 1 — 131071
IP Router Configuration
Page 157