Alcatel-Lucent 7450 Configuration Manual page 216

Router Advertisement Commands
min-advertisement-interval
Syntax [no] min-advertisement-interval seconds
Context config>router>router-advert>if
Description
This command configures the minimum interval between sending ICMPv6 neighbor discovery router
advertisement messages.
Default 200
Parameters seconds — Specify the minimum interval in seconds between sending ICMPv6 neighbor discovery
mtu
Syntax [no] mtu mtu-bytes
Context config>router>router-advert>if
Description
This command configures the MTU for the nodes to use to send packets on the link.
Default no mtu — The MTU option is not sent in the router advertisement messages.
Parameters mtu-bytes — Specify
other-stateful-configuration
Syntax [no] other-stateful-configuration
Description This command sets the "Other configuration" flag. This flag indicates that DHCPv6lite is available
for autoconfiguration of other (non-address) information such as DNS-related information or
information on other servers in the network.
Default no other-stateful-configuration
prefix
Syntax [no] prefix [ipv6-prefix/prefix-length]
Context config>router>router-advert>if
Description This command configures an IPv6 prefix in the router advertisement messages. To support multiple
IPv6 prefixes, use multiple prefix statements. No prefix is advertised until explicitly configured using
prefix statements.
Page 216
router advertisement messages.
Values 3 — 1350
the MTU for the nodes to use to send packets on the link.
Values
1280 — 9212
7450 ESS Router Configuration Guide