Internal Options/Codecs; Internal Options/Iax Jitter Buffer - Grandstream Networks GXE5102 User Manual

Music On Hold Suggest
Language
Bandwidth

INTERNAL OPTIONS/CODECS

The following codes are supported in GXE5102/5104/5108/5116.
•
PCMU
•
PCMA
•
GSM
•
ILBC
•
G.722
•
G.726
•
ADPCM
•
LPC10
•
G.729
•
G.723
•
H.263
•
H.263p
•
H.264

INTERNAL OPTIONS/IAX JITTER BUFFER

Enable Jitter Buffer
Force Jitter Buffer
Drop Count
MAX Jitter Buffer
MAX Interpolation Frames
Recync Threshold
Max Excess Buffer
Min Excess Buffer
Firmware version 1.0.0.19
Suggests Music On Hold for the channel.
Configures default language for the channel. This can be used by
prompts.
Configures allowed codecs for different bandwidth requirement. The
default setting is "Low".
Enables the use of jitter buffer on the receiving side of a SIP channel.
Forces the use of jitter buffer on the receiving side of a SIP channel.
Configures drop count.
Configures the maximum time (in milliseconds) 0 for the buffer.
Configures the maximum number of interpolated
buffer should return consecutively.
Jumps in the frame timestamps over where the jitter buffer is
resynchronized. This feature is useful to improve the quality of voice
with big jumps in/broken timestamps sent from exotic devices and
programs. The default setting is 1000.
Configures the maximum number (in milliseconds) to pad the jitter
buffer.
Configures the minimum number (in milliseconds) to pad the jitter buffer.
GXE5102/5104/5108/5116 USER MANUAL
frames the jitter
Page 36 of 52